CTP - 2019 Product Guide

SUPPLIER PREFIX: CPS

REMOTE STARTACCESSORIES

1A RELAY - 4/PACK SKU: ADS-RLY-1A Ideal for various low current

DIG. ADJUSTABLE SENSOR SKU: FT-DAS The FT-DAS gives you 3 different sensors in one.Along with a dual stage shock sensor, the FT-DAS includes tilt and G-force sensors, which shut down the vehicle when it senses movement and notifies you on your 2-way remote.A perfect solution for installing onto manual transmission vehicles.

VEHICLE PAGING SENSOR SKU: RPS TOUCH With the FT-RPS-TOUCH mounted on your windshield, you can arm your Compustar alarm simply by pressing the red button on the RPS-TOUCH.A 4-digit code is all you need to disarm your alarm and unlock your doors.The FT-RPS- TOUCH also doubles as a 2-way remote pager.

SHOCK SENSOR SKU: 2WFM-AS/S The 2WFM-AS/S is designed to protect your vehicle form unwanted impact. It will provide either a warn away or full alarm trigger depending on severity of impact. The sensitivity level is adjustable. The Shock Sensor is included with all Compustar alarm and alarm/ starter combo units.

applications, the ADS-RLY A1 mul- tipurpose 1 Amp relay kit can also be combined with our ADS-RNG products for low cost RF transpon- der bypass applications. Product sold as 4-pack.

RF DECODER SKU: FT-D100

ALARM ACCESSORY KIT SKU: FT-ALARMIT-KIT The FT-ALARMIT KIT makes it

TRANSPONDER BYPASS SKU: COMPUTRANS The Computrans V2 is used when installing remote start products in vehicles equipped with a Radio Frequency based immobilizer system.This type of system uses a small chip imbedded in the ignition key, called a transponder, to transmit a very low powered RF signal. If your vehicle has this type of security system, you will need this type of bypass module.

BACKUP BATTERY SKU: FT-BATT-BACKUP

The FT-D100 Decoder is a translator that allows Firstech radio frequency kits (RF) to communicate with the iDataLink ADS-AL-CA Universal Transponder/Doorlock Interface using Remote Start firmware (RS) from ADS.

The FT-BATT-BACKUP provides an extra three hours of battery power to all alarm functions even if your car loses power.The system con- nects to your CM5/CM6/CM7 Series alarm or alarm starter. Provides backup battery power to all alarm functions for the duration of the battery’s life. Ideal for protecting your car even when the primary battery power is cut off. OPTIONAL PROGRAMMER SKU: OPTION PRO The Option Programmer is used to program Dealer Only options on the CompuStar and CompuStar Pro Se- ries. It comes with all the equipment needed to update your CM4 Series CompuStar Pro control modules. This can also be used to program other systems from Firstech.

easier than ever to add an advanced security and alarm system to your existing Compustar remote starter. Includes an FT-DAS Shock Sensor, an FT-SIREN Alarm Siren and an FT- LED BLUE Theft Deterrent LED.

DOOR LOCK INVERTER SKU: DM-600

This harness is used to switch the lock and unlock outputs on the CM3 and CM4 series control modules. The harness provides a 600 mA pos- itive 12V+ on the lock and unlock wires.The DM600 plugs directly into the current lock harness on the CM3 and CM4 series.

1-800-565-2233 • www.ctpdistributors.com Ontario to Newfoundland

1-888-422-9329 • www.ctpdistributors.com Alberta, Saskatchewan, Manitoba

1-800-663-5356 • www.ctpdistributors.com British Columbia

143

Made with FlippingBook - Online magazine maker